Scapefolio DEOpen planner

How to set up an aquarium, step by step

From an empty tank to your first fish in about four to six weeks

Setting up the tank takes an afternoon. Before fish can move in, though, a few weeks will pass: bacteria first have to settle that break down toxic waste. This guide takes you through every step in the right order. The figures are guide values; the free aquarium planner gives you values that fit your tank.

1. Choose the tank and the spot

Tanks from about 54 litres (14 US gallons) work for beginners, 100 litres (26 gallons) and more is better. Larger tanks are more forgiving because temperature and water values change more slowly. Length matters too: many fish need at least 60 or 80 cm (24 or 32 in) of swimming space.

A filled aquarium weighs roughly 1.3 to 1.5 kg per litre of tank volume (11 to 12.5 lb per gallon), including water, substrate, stones and glass. A 112-litre tank puts around 150 kg (330 lb) on its stand. The cabinet has to carry that and stand level. The aquarium calculator works out the weight of your tank.

2. Get the equipment

The basics are a filter, a heater, lighting, a thermometer and water tests.

The aquarium calculator shows guide values for filter, heater, light and CO₂ for your tank size.

3. Add the substrate

The right substrate depends on what will live in the tank:

As a guide, fill aqua soil 3 to 4 cm (about 1.5 in) deep at the front and 6 to 7 cm (about 2.5 in) at the back, sand 3 to 5 cm, gravel 4 to 6 cm. The slope towards the back makes the tank look deeper. Rinse sand and gravel thoroughly first, but not aqua soil. The substrate calculator shows how many litres and bags you need.

4. Place stones and wood

Stones and wood, the hardscape, give the tank its shape. A clear focal point slightly off centre, at about a third of the width, works best.

Which materials suit your water and style is listed in the guide under stone & wood and in the aquascaping styles.

5. Plant the tank

Planting is easiest when the substrate is just damp or there are a few centimetres of water in the tank. Plant densely from the start and use plenty of fast-growing species: they take up nutrients and give algae little chance while the tank cycles.

Good for starting out: plants for beginners, plants without CO₂ and fast-growing plants.

6. Fill with water

Let the water run slowly onto a plate or a plastic bag so the substrate does not swirl up. Tap water is usually fine; your water supplier publishes its hardness. Where tap water contains chlorine or chloramine, add a water conditioner.

Then switch on the filter. Only switch on the heater once it has hung in the water for about a quarter of an hour and adjusted to the temperature. The manufacturers’ instructions come first.

7. Let it cycle (4 to 6 weeks)

Now the tank needs time. Bacteria settle in the filter and substrate and convert ammonium via nitrite into nitrate. Nitrite is toxic to fish even in small amounts. The tank is ready only once nitrite has been undetectable for several days.

During this time, keep the light short, change part of the water once a week (more often with fresh aqua soil) and test nitrite two to three times a week. The guide How to cycle an aquarium explains the details.

8. Add the first animals

Start with a few hardy animals and increase the stocking over several weeks so the bacteria can keep up. Shrimp are sensitive and are best added once the tank has been running stably for a few weeks.

To acclimatise, float the bag in the tank for about 15 minutes so the temperature evens out. Then add tank water bit by bit over half an hour and move the animals with a net, without pouring the transport water into the tank.

How many animals fit and what group size they need is shown by the stocking calculator. The old rule of “1 cm of fish per litre” is considered outdated: tank length, group size and behaviour are what matter.

9. Regular care

Frequently asked questions

How long does it take to set up an aquarium?

You can do the tank, substrate, hardscape and plants in a day. After that the tank usually needs four to six weeks to cycle before the first fish move in. It takes a few months for the plants to grow in.

Can I add fish straight away?

No. Without a cycled filter, ammonium and nitrite rise and can poison fish. Wait until nitrite has been undetectable for several days.

What size of aquarium is good for beginners?

From about 54 litres (14 gallons), better 100 litres (26 gallons) or more. Larger tanks are more stable, and more fish species have enough room.

Do I need a CO₂ system?

No. Many plants grow well without added CO₂, such as Java fern, anubias, cryptocorynes and mosses. CO₂ pays off for carpeting plants and demanding stem plants.

In what order do I set up an aquarium?

Spot and stand, tank, substrate, stones and wood, plants, water, switch on the equipment, let it cycle, then add animals step by step.

More guides

Updated: November 2026